Adding an NDAQ_EU account
To add an NDAQ_EU account:
- Click Accounts in the left navigation pane.
Click +New Account at the top of the Accounts screen.
The Account Information section is displayed.
In the Account Name/Number field when creating an account for NDAQ EU (Nordic), enter the up to 10-character exchange-provided account name, which is required for order routing. The user's TT routing account is sent to the exchange as the clearing account in the Tag 1 field in the exchange API.
- If this is a sub-account, select a "parent" account in the Parent field.
- Click the Type field and select an account type.
Use this field to define the routing behavior for the account and set up its
account hierarchy for tiered risk. All order routing
is based on user account. Select one of the following:
Routing (external clearing): Defines the parent account as a clearing account sent to the exchange
on all orders. If assigned to a user, the account appears in the user's list of routable accounts. When
selected by a user, the account is used to route orders and identify the account to the exchange (e.g,
FIX Tag 1). If configuring this account as an omnibus account, select this option. If an internal
sub-account is assigned to a parent account, the sub-account inherits the exchange connectivity of the
Routing (internal sub-account): Defines the account as a sub-account that is not routed to the
exchange. This allows you to assign the user to an internal account for routing and risk purposes, even
though a parent account will be sent to the exchange as the actual clearing or omnibus account.
Tip: Sub-accounts set as "Routing (internal sub-account)" can be selected by client trading
applications for submitting orders, but only their parent account's clearing account is routed to the
Non-Routing: Not sent to the exchange. Recorded internally and can be used for back-office
purposes, or as a parent risk account that allows you to group a set of sub-accounts together and set
risk for the non-routing parent.
Tip: Accounts set as "Non-Routing" are not selectable by client trading applications.
Audit Trail Only: Not sent to the exchange. Use this account type for the TT FIX Inbound Drop Copy
service, which allows third parties to import their data sources into TT. When selected, the "Order
Cross Prevention" option is disabled for this account.
Error Routing: An account that can be used to route order reject messages created by FIX Order
Router or FIX Inbound Drop Copy to specific Drop Copy sessions. Error accounts can be assigned to users
and to FIX Order Routing and Inbound FIX Drop Copy sessions. An error account is not routed to the
exchange and is not part of account hierarchies.
- To prevent order crossing using this account or any of its sub-accounts, click the
Order Cross Prevention field and select an order crossing rule. The TT Trade
application performs the following order actions based on which rule is selected:
- Not Applied — No order cross prevention rule is applied to the account.
- Reject New — Reject a new order that could potentially fill resting orders in the same account or account tree. Applies to only Limit orders and native Iceberg orders.
- Cancel Resting (wait for ACK) — Send a cancel request to the exchange for the
resting order. When the exchange acknowledges the request and cancels the order, submit the new order. Applies to only Limit orders and native Iceberg orders.
Position Transfer —
When a match is detected, the resting order is canceled or the working order quantity is reduced by the size of the aggressive order. A fill is created by TT and sent to each account. If the aggressive order was larger than the resting order, then the remainder of it will be sent to market. For a description of how Position Transfer works, refer to Position Transfer.
Position Transfer (if resting order is best bid/offer) — This rule works the same as Position Transfer except that the internal matching occurs only if an order has the potential to fill a resting order at the current best bid/ask price.
Note: When using this rule, the resting order may get matched and filled at the exchange while the aggressive order is in flight.
- Optionally, check one of the following options:
- Use Reject New instead of Position Transfer within the same account — When enabled, this setting prevents the use of position transfer within the same account and uses "Reject New" for order cross prevention. This setting is active when "Position Transfer" is selected for the account, otherwise, it is grayed-out.
- Go to market with Position Transfer balances w/o waiting for Cancel/Reducing ACK — When enabled, Position Transfer does the following if the aggressive order quantity is larger than the resting order quantity:
- Reduces the aggressive order quantity by the amount of the resting order
- Submits a request to the exchange to cancel the resting order, followed immediately by an order for the remaining quantity without waiting for acknowledgement that the resting order was canceled or reduced.
For example, if a 2-lot Sell order is resting when a 10-lot Buy order is entered that matches, Position Transfer immediately sends a cancel request to the exchange for the Sell order, followed by an 8-lot Buy order. Position Transfer then waits for the exchange to acknowledge that the 2-lot Sell order was canceled successfully. After receiving acknowledgement, the 2-lot fills are created internally and transferred to each trader's account.
Using this option, you can submit part of the order to the market sooner while the remainder of the order waits to be transfered. You can also reduce the risk of the entire aggressive order being rejected while waiting for the position transfer to complete.
Note: With this option, there's a risk that the crossing orders may match at the exchange if the two traders are using separate exchange connections on two different order routing servers.
- Disable trading (this account only) — Disables trading for this account. This checkbox is checked by
- Disable trading (sub-accounts) — Disables trading for all child accounts of this
- Disable trading (autoliquidate) — Checked automatically after auto-liquidate is triggered
on an account. Increase the credit limit and uncheck this option to restore trading to a liquidated account. This
setting can only be checked by the Setup application when an account is liquidated (i.e., you cannot manually check
- Optionally, configure the Prevent Duplicate Orders settings:
- Check Quantity — Sets the number of duplicate orders to allow within
the configured time frame.
- Check Time Frame — Sets the time frame in milliseconds and enables the duplicate order check
for the account. Enter a value from 1-999999999. When the number of orders for the same instrument and price
set in the Check Quantity field occurs within the configured time frame, the
duplicate orders are rejected. When Check Time Frame is blank, no duplicate order check is
applied to the account.
- Apply to sub-accounts — Copies the "Prevent Duplicate Orders" settings from the parent account
to their child accounts. This ensures that any sub-accounts added to the shared parent account cannot have a
different\missing value in this field . When checked, the value cannot be changed on any sub-accounts added
by your company or a shared company.
- In the Order Management System (OMS) Settings section, configure the following:
- Lock fill notifications on new staged orders — Controls how fills are reported back to the care order originator. When this setting is checked, new care orders are automatically locked when they are claimed. Fills for locked orders will have to be manually allocated and released. When unchecked, fills and fills prices are immediately released back to the customer using the average prices calculated by TT. This setting supports the Lock and Release functionality in TT OMS.
- Only combine orders with the same price — Restricts how care orders are bulked. When this setting is checked, only care orders with the same price can be added as part of a bulk order. When unchecked, care orders at different prices can be bulked. Bulking requires that all care orders have the same product and Buy/Sell side. This setting supports the Bulking functionality in TT OMS.
- Only combine orders with the same account — Restricts how care orders are bulked. When this setting is checked, only care orders with the same account can be added as part of a bulk order. When unchecked, care orders in different accounts can be bulked. Bulking requires that all care orders have the same product and Buy/Sell side. Supports the Bulking functionality in TT OMS.
- Only combine orders with the same customer — Restricts how care orders are bulked. When this setting is checked, only care orders with the same order profile can be added as part of a bulk order. When unchecked, care orders with different customer order profiles can be bulked. Bulking requires that all care orders have the same product and Buy/Sell side. Supports the Bulking functionality in TT OMS.
- Click Create.
The new account appears in the Accounts list in the data grid. Sub-accounts appear as nested
under their parent account.
Configuring NDAQ_EU exchange properties
- Click Accounts in the left navigation pane and select an account in the data grid.
- Click the Exchanges tab for the selected account.
- Click the Select an Exchange selector to find and select an exchange.
- Configure the settings in the Exchange Properties section.
Configure the following NDAQ_EU settings:
Note: To support MiFID II compliance, the Trading Capacity field is populated as the concatenation of Tags 528 (Order Capacity) and 529 (Order Restrictions).
- On the Counterparties tab, assign a counterparty to the account for OTC trades.
In the Counterparties section, click Add to add a counterparty or Remove to delete one from the account. Required for order routing.
Note: To add or remove counterparty identifiers available to your firm, click Manage Counterparty Identification.
- Click Save Changes.